Information Stand
Our Information Stand is the ideal means to display directions, information or instructions in a clear 45 degree presentation at a height that is easy to read. The display can be either A4 or A3 with the ability to switch between portrait or landscape formats mounted on an upright post with a stable base plate.
Information is displayed with the protection of a clear 2mm acrylic cover.
DIMENSIONS and FINISH
The Information Stand has an overall height of 1100mm (with A4) 32mm dia upright and 330mm diameter stable base plate and is available in either stainless steel or PPC grey (a hard wearing baked on finish). A4 or A3 signage plates are purchased separately.
|
Information Stand PPC Grey £205.00 |
|---|
|
|
Information Stand SS £215.00 |
|---|
|
|
Aluminium Signage Plate A4 - with End Strips £38.00 |
|---|
|
|
Aluminium Signage Plate A3 - with End Strips £55.00 |
|---|
USEFUL TIPS AND GUIDELINES
Both finishes for this stand are hard wearing and will provide years of service indoors. Whilst the stainless steel version is capable of being used outside, we do not recommend this as the display is not yet hermetically sealed.
INSTALLATION INSTRUCTIONS
- Assemble the Information Stand by placing the stainless steel cover over the heavy black baseplate.
- Remove the bolt from the end of the upright, fit the washer onto the bolt and place it through the central hole of the base plate and cover and into the end of the upright. Tighten securely with the Allen Key provided.
- Using a cross head screw driver, remove one of the end caps from the signage plate and slide onto the angled square on the top of the upright so that it engages in the slots on the back of the signage plate. When central, lock in place by tightening the small grub screw from the rear.
- Slide the acrylic cover out, remove the protective film.. from both sides!.. slide your artwork in and replace the cover. Screw the end cap back into position.