Link Hanger - Order Enquiry - Prices

This hanger is in wide use by major galleries and was designed for medium to heavy weight paintings, is immensely strong and ideal for accommodating both flat and rebated frames. The link hinges out to bridge the variable gap between frame and wall and will accommodate even deeply rebated frames.

The plates and link are a bronzed finish to help them 'blend in', incorporate a measure to increase security, are adjustable to aid installation and once again provide the facility for storage attachments.

L Bracket - Order Enquiry - Prices

The L Bracket is the recommended support for wide or very heavy paintings. Two or more of these brackets are used to form a ledge beneath the artwork which supports the bottom member of particularly heavy or wide paintings, thereby removing the strain from the frame joints. This is especially relevant for heavily glazed works.

When the weight of the artwork is supported by the 'L' bracket it is then secured against the wall with mirror plates.

H Track - Order Enquiry - Prices

The hanging track range is ideal for environments where the works of art are changed frequently or where it is inappropriate to damage the wall surface.

H track is a discreet extrusion designed to be applied to existing wall surfaces at a high level so that it blends with the ceiling junction or mouldings, and provides a stable point from which to hang artworks using a variety of materials including transparent cord, stainless cable, or stainless rod.

All of these systems are compatible with the Ryman hanger range for a higher level of security.

We will be happy to advise you on the most appropriate method for your installation.

Panel Clip - Order Enquiry - Prices

The Panel Clip has been designed to hook over the top of wood panels so that artworks may be hung using one of the methods shown on page 26 (category 2) without marking the surface of the panel. The clip is produced from stainless steel and lined with neoprene to avoid damage to the wood and to help maintain positioning of the clip.

The standard clip will fit 3/4'(19mm) wood panels and is supplied in pairs.

Flush Mount Track - Order Enquiry - Prices

The Flush Mount track has been designed to be applied to wall surfaces prior to the installation of drywall panels in order to achieve a minimal and discreet 'slot' in the wall surface that becomes part of the architecture. Artworks can then be hung using a variety of materials including transparent cord, stainless cable or stainless rod.

We have found this extrusion to be of particular interest to architects and designers as it is easy to install during construction and provides a flexible system with a very low visual profile.

As with the other tracks this system is compatible with the Ryman Hanger range for a higher level of security.

We will be happy to advise you on the most appropriate method for your installation.

Ryman Security Keeper - Order Enquiry - Prices

The Ryman Security Keeper has been designed to increase the security of the Ryman system still further. When the standard keeper is replaced with the security version it is 'impossible' to remove the artwork without
the use of the tool. These tools are sequentially numbered and the owners recorded on our database.

Please note that it is important to confirm that the artwork that you intend to hang with this system meets the appropriate criteria that are listed in the installations section of our website.